Bora Otomatik Silah
1
2
3
4
5
6
7
9
8
10 13 14
10
11
11 11
12
12 12
15
GOP 10,8 V-LI
1 609 92A 009 English
Disconnect the plug from the power source and/or the conditions, e. g., when sparks emit from sanding metals,
battery pack from the power tool before making any sanding debris in the dust bag, micro filter or paper sack
adjustments, changing accessories, or storing power (or in the filter sack or filter of the vacuum cleaner) can
tools. Such preventive safety measures reduce the risk of self-ignite. Particularly when mixed with remainders of var-
starting the power tool accidentally. nish, polyurethane or other chemical materials and when
Store idle power tools out of the reach of children and the sanding debris is hot after long periods of working.
do not allow persons unfamiliar with the power tool or Keep hands away from the sawing range. Do not reach
these instructions to operate the power tool. Power under the workpiece. Contact with the saw blade can
tools are dangerous in the hands of untrained users. lead to injuries.
Maintain power tools. Check for misalignment or bind- Use appropriate detectors to determine if utility lines
ing of moving parts, breakage of parts and any other are hidden in the work area or call the local utility com-
condition that may affect the power tool’s operation. If pany for assistance. Contact with electric lines can lead
damaged, have the power tool repaired before use. to fire and electric shock. Damaging a gas line can lead to
Many accidents are caused by poorly maintained power explosion. Penetrating a water line causes property dam-
tools. age.
Keep cutting tools sharp and clean. Properly maintained When working with the machine, always hold it firmly
cutting tools with sharp cutting edges are less likely to bind with both hands and provide for a secure stance. The
and are easier to control. power tool is guided more secure with both hands.
Use the power tool, accessories and tool bits etc. in ac- Secure the workpiece. A workpiece clamped with clamp-
cordance with these instructions, taking into account ing devices or in a vice is held more secure than by hand.
the working conditions and the work to be performed. Do not open the battery. Danger of short-circuiting.
Use of the power tool for operations different from those Protect the battery against heat, e. g., against
intended could result in a hazardous situation. continuous intense sunlight, fire, water, and
Battery tool use and care moisture. Danger of explosion.
Recharge only with the charger specified by the manu- In case of damage and improper use of the battery, va-
facturer. A charger that is suitable for one type of battery pours may be emitted. Ventilate the area and seek
pack may create a risk of fire when used with another bat- medical help in case of complaints. The vapours can irri-
tery pack. tate the respiratory system.
Use power tools only with specifically designated bat- Use the battery only in conjunction with your Bosch
tery packs. Use of any other battery packs may create a power tool. This measure alone protects the battery
risk of injury and fire. against dangerous overload.
When battery pack is not in use, keep it away from oth- Use only original Bosch batteries with the voltage list-
er metal objects, like paper clips, coins, keys, nails, ed on the nameplate of your power tool. When using oth-
screws or other small metal objects, that can make a er batteries, e.g. imitations, reconditioned batteries or
connection from one terminal to another. Shorting the other brands, there is danger of injury as well as property
battery terminals together may cause burns or a fire. damage through exploding batteries.
Under abusive conditions, liquid may be ejected from Wear protective gloves when changing application
the battery; avoid contact. If contact accidentally oc- tools/accessories. Application tools/accessories become
curs, flush with water. If liquid contacts eyes, addition- hot after prolonged usage.
ally seek medical help. Liquid ejected from the battery Do not scrape wetted materials (e.g. wallpaper) or on
may cause irritation or burns. moist surfaces. Penetration of water into the machine in-
Service creases the risk of an electric shock.
Do not treat the surface to be worked with solvent-con-
Have your power tool serviced by a qualified repair per-
taining fluids. Materials being warmed up by the scraping
son using only identical replacement parts. This will en-
can cause toxic vapours to develop.
sure that the safety of the power tool is maintained.
Exercise extreme caution when handling the scraper.
Safety Warnings for Cordless Multi-Cutters The accessory is very sharp; danger of injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory Product Description and
may contact hidden wiring. Cutting accessory contacting
a “live” wire may make exposed metal parts of the power Specifications
tool “live” and could give the operator an electric shock. Read all safety warnings and all instruc-
Use the machine only for dry sanding. Penetration of wa- tions. Failure to follow the warnings and in-
ter into the machine increases the risk of an electric shock. structions may result in electric shock, fire
Caution, fire hazard! Avoid overheating the object be- and/or serious injury.
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable While reading the operating instructions, unfold the graphics
page for the machine and leave it open.